Upload Your DTF Gang Sheet

Discover the ultimate in professional-quality convenience with Dig Print Factory  the foremost provider of custom DTF Transfers...
$8.00
$8.00
Size: 22 In X 12inc
Subtotal: $8.00
10 customers are viewing this product
Upload Your DTF Gang Sheet

Upload Your DTF Gang Sheet

$8.00

Upload Your DTF Gang Sheet

$8.00
Size: 22 In X 12inc
Discover the ultimate in professional-quality convenience with Dig Print Factory  the foremost provider of custom DTF Transfers in the industry. Our top-notch DTF (Direct to Film) transfers empower everyone—from small to large shops, hobbyists, and brands—to effortlessly print any design on a wide array of products. Whether you require vibrant whites, solids, gradients, or fine lines, our transfers have virtually no limitations!

1. Prepare Your Materials

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

Before you start, make sure you have all your materials ready. These should include your ready to press DTF transfer, a heat press or a home iron, garment or fabric on which you would like to press the transfer, and a teflon sheet or parchment paper to protect your heat press or iron.

2. Warm Up Your Heat Press or Iron

Warm up your heat press or your iron to the right temperature. For a heat press, the temperature should ideally be between 290-300 degrees Fahrenheit. For a home iron, set it to the cotton or highest setting. .

3. Position Your DTF Transfer.

Lay your garment or fabric flat on the pressing area. Position your DTF transfer on the garment where you want the design to be. Make sure the printed side of the transfer is facing down (touching the fabric)

4. Pressing Time

Once you’ve positioned your transfer, cover it with a teflon sheet or parchment paper. This will protect your heat press or iron as well as ensure an even distribution of heat. If you’re using a heat press, close it and press for about 15 to 20 seconds. If you’re using a home iron, firmly press the iron down on the transfer and hold it there for about 2 minutes. Ensure all areas of the design receive equal heat.

5. Peeling off the Transfer

Open the heat press or remove the home iron, and wait for about 5 to 10 seconds. Then, gently start peeling off the transfer paper from one corner. It’s best to peel it off when it’s still warm but not too hot, as it may affect the quality of the design.

6. Make sure Design has Adhered Well

After peeling off, check if the design has adhered well to the fabric. If not, press it again for a few seconds. If it is ok, allow your fabric to cool down for a while before washing.

1. Dedicated to delivering top-tier DTF transfers crafted with precision, while producing the most vibrant colors, extreme details and perfect gradients that work on any product.

2. You’ll receive the softest feeling, full color DTF transfers & be amazed on things you could do. On top of that, what makes us unique is that our transfers don’t wash off! The Hot Peel transfers allow our shirts to last easily over 50+ washes.

3. Reach us about any concern really! We’ll get back at a glazing speed. If there’s a misprint, or a quality issue, shoot us a message and we’ll send a free replacement..

• Wash inside out in cold water

• Do not bleach

• Do not dry clean

• Air dry after washing

Follow these simple instructions for a perfect application:

•All all files must be in 300dpi saved in .PNG format without background.

• Resolution should be 300 DPI for maximum image quality almost every image works, just make sure it's visibly not blurry.

• Every order will be made sure that it meets the basic image requirements and any additional requests that were left while ordering will be followed & enhancements will be made.

Related Products